Polyco GL642 Bodyguards Clear Vinyl Powdered Disposable Gloves

The Polyco GL642 Bodyguards Clear Vinyl Powdered Disposable Gloves contain no latex which eliminates protein sensitisation. The Polyco GL642 Clear Vinyl Powdered Disposable Gloves are designed to protect against contamination, dirt and potential irritants in low risk situations. The Gloves have been powdered for easy application and sweat absorption which aids in comfort if worn for an extended period of time.

The  Polyco GL642 Clear Vinyl Powdered Disposable Gloves are EN1186 food contact approved and will not contaminate any food or food materials. 

The Polyco GL642 Clear Vinyl Powdered Disposable Gloves are a cost effective choice when gloves need to be changed frequently such as in hair salons or food preparation stations. They have a smooth finish and high tensile strength providing a reliable barrier against contamination and infection. 

Main Features of the  Polyco GL642 Clear Vinyl Powdered Disposable Gloves

• 100 Gloves per dispenser

• Powdered – Which helps donning

• Provides excellent level of grip in wet or dry conditions

• Ideal for food manufacture and hairdressing

• Maximum level of grip

• High level of dexterity

• Suitable for food preparation

• Rolled cuff for additional strength and prevention of liquid roll back

• AQL 4.0

• Available in four sizes

Testing Of The Polyco GL642 CLEAR VINYL POWDERED DISPOSABLE GLOVES DISPOSABLE GLOVES

EN1186 Food Contact Approved

For minimal risk environments only

Applications for The Polyco GL642 Clear Vinyl Powdered Disposable Gloves

The Polyco GL642 Clear Vinyl Gloves are suitable for use in indoor or outdoor, wet or dry and dirty or clean working environments. Below are some of their typical usages.

• Food preparation

• Food manufacture

• Local authority

• Janitorial

• Hair and Beauty

• Light duty maintenance

• Painting and decorating

Sizing Information Of The Polyco GL642 Clear Vinyl Powdered Disposable Gloves

Wearing the correct sized glove is essential to ensure safety and comfort. If gloves are too small they may be stretched, reducing protection and making them more likely to tear. If gloves are too large they can be pulled off by machinery or even pull the hand into moving machinery. Ill-fitting gloves will also greatly reduce dexterity and cause fatigue. European Standard EN420 sets out general requirements for sizing. To determine the size of glove required, measure the circumference of the dominant hand above the thumb and below the fingers, as shown in the diagram. This can then be referenced to the table below.

In order to select the correct size of safety glove, simply measure across your palm at the point indicated in the picture. Then compare your measurement with the chart below to ensure that you select the correct size of glove for your hand. We would recommend using a tape measure or ruler to get the right measurement. Our measurements are based on centimetres. Where your measurement falls on the boundary of two sizes, we would recommend selecting the larger of the two sizes for a comfortable fit. However, if you would specifically like your gloves to be a closer fit, perhaps for work that requires fine movements, select the smaller of the two sizes.

Glove Size	S	M	L	XL
Measurement across palm	7cm	8cm	9cm	10cm
Product Code	GL6421	GL6422	GL6423	GL6423

Further Information on The Polyco GL642 CLEAR VINYL POWDERED DISPOSABLE GLOVES

The information contained on this site is intended to assist the wearer in selection of Personal Protective Equipment. The results of physical tests should also help in glove selection however, it must be understood that actual conditions of the use cannot be simulated and it is the responsibility of the user not the manufacturer or supplier to determine the glove suitability for the intended use.

To get the best service from your gloves ensure that after use all contaminant is removed.

Store in dry conditions away from direct sunlight and heat.

You are advised to retain packaging for reference.

These safety gloves should not be worn where there is a risk of entanglement with moving machinery.

Conformity Statement and User Instructions

Please find the conformity statement and user instructions for these gloves by clicking the PDF link below.