Micro Dot Handling Gloves (60 Pairs)

Buying in bulk is the way to go if you’re outfitting a large workforce. Costs are kept down, you’re guaranteed to have plenty of gloves to go around, and there’s always a pair handy when you need them. 

Micro Dot Handling Gloves (60 Pairs) are a bulk pack of lightweight, close fitting knitted gloves with great feel and dexterity. Micro Dot Handling Gloves excel in handling departments and are made using cotton and Lycra which ensures breathability and elasticity.

What’s Included?

• 1 x Pairs of Handling Gloves

The Benefits of Buying in Bulk

Buying in bulk has obvious benefits, the main being the price of your gloves is cheaper. You can see this clearly by comparing the bulk purchase price to the price of an individual pair of Micro Dot Handling Gloves.

The other benefit is that you will always have gloves on hand. This is invaluable for big contractors and firms, as PPE and safety standards are vitally important.

Are Other Bulk Quantities Available?

Yes, absolutely. You can purchase Micro Dot Handling Gloves in purchase quantities of 120 pairs per order to get even better bang for your buck.

• Micro Dot Handling Gloves (120 pairs per order)

SIZING INFORMATION FOR MICRO DOT HANDLING AND INSPECTION GLOVES

Micro Dot Handling Gloves are available in four different sizes, meaning you’ll quickly be able to find the size that’s right for you. To find your size, measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together as seen in the image below.

Size	Hand Circumference (mm)
Size 7	178mm
Size 8	203mm
Size 9	229mm
Size 10	254mm

Please note these gloves are designed to have a close fit. You may wish to select a size above your usual size if you prefer a looser fit.

Lightweight Protection

Micro Dot Handling Gloves are designed against a sleek and slender design specification brief, making them a great choice for anyone concerned about excess padding and bagginess. They hug the hand closely to maximise precision and accuracy when handling delicate materials. 

Precision Handling

Thanks to their micro-dot textured coating, Handling Gloves are perfect for use on assembly lines and inspection belts. Their low-linting Lycra foundation means they hold their composition well without linting or shedding.

Perfect for Inspection

These gloves are our number one choice for inspection. If you need low-linting, lightweight gloves that wont shed when you’re dealing with intricate, tricky material, look no further.

CLEANING/MAINTENANCE

Both new and used gloves should be thoroughly inspected before being worn to ensure no damage is present. If you intend to reuse these gloves, they should not be left in a contaminated state and should be cleaned as much as possible. Laundering of this glove is not recommended.

Care should be taken when removing gloves to avoid any contaminant contacting bare skin.

STORAGE

Gloves should be ideally stored in cool dry conditions in the original package and out of direct sunlight.

Documentation for the UCI Gloves

Conformity Statement	Instructions for Use