HexArmor Chrome SLT 4062 Arc Flash Gloves with Extended Cuffs

Arc flashes aren’t a common workplace hazard, but the results of one can be catastrophic. With that in mind, it’s essential you fortify your workers against the unexpected with the best protection possible. Blending outstanding cut, heat, and arc flash protection into a single package, HexArmor Chrome SLT 4062 Arc Flash Gloves with Extended Cuffs keep workers safe in perilous industrial environments. Extended cuffs further mitigate the danger of molten splashing and exposure to harmful liquids.

What’s Included?

• 1 x Pair of Arc Flash Gloves

WHY SHOULD I BUY THE HEXARMOR CHROME SLT 4062 ARC FLASH GLOVES?

• Outstanding Arc Flash Protection: Lab tested in accordance with HRC at 46 Cal/cm2
• Impressive Heat Resistance: Tested in accordance with EN 407 for impressive range of resistances
• Level E Cut Protection: ISO Blade Cut tested to Level E, one of the highest cut resistances available
• Goatskin Leather Palms: Provide exceptional abrasion protection across palms
• Grippy Feel: Greasy or dry, these gloves will handle well
• Extended Safety Cuffs: Extra protection across the wrists for secure handling

Product Codes

• HexArmor Chrome SLT 4062 Arc Flash Gloves with Extended Cuffs – Size 7 (Small): 4062_S
• HexArmor Chrome SLT 4062 Arc Flash Gloves with Extended Cuffs – Size 8 (Medium): 4062_M
• HexArmor Chrome SLT 4062 Arc Flash Gloves with Extended Cuffs – Size 9 (Large): 4062_L
• HexArmor Chrome SLT 4062 Arc Flash Gloves with Extended Cuffs – Size 10 (Extra Large): 4062_XL

Which Size Should I Choose?

To find the right size for you, please measure the circumference of your hand (excluding the thumb) around your knuckles with your fingers closed, as shown in the diagram below. Then, match your measurement to the corresponding size in the sizing guide below the diagram, and select using the drop-down menus near the top of the page.

Glove Size	Palm Width	Hand Height
Size 7 (Small)	87mm	245mm
Size 8 (Medium)	90mm	255mm
Size 9 (Large)	97mm	260mm
Size 10 (Extra Large)	102mm	265mm

Where Can I Use the HexArmor Chrome SLT 4062 Gloves?

Thanks to their impressive level of protection in a variety of hazardous conditions, the Supertouch Chrome SLT 4062 are designed for high risk workplaces with risk of arc flashes. Suitable tasks include:

• Arc Flash Application
• Building
• Construction
• Electricians
• Electronics
• Engineering
• Glass Handling
• Machine Operation
• Metal Fabrication
• Offshore Work
• Power Stations
• Refineries
• Sheet Metal Handling

What Can the HexArmor Chrome SLT 4062 Protect Me From?

To ensure these gloves provide you with the protection you need, they have been tested to a range of different standards. The results of mechanical resistance tests under EN 388 and EN 407 can be found in the tables below. More information on the standards to which these gloves have been certified can be found in the PDF documents near the bottom of this page.

 

EN 388

• EN 388: 2X23E

Hazard	Resistance Level
Abrasion Resistance	Level 2
Cut Resistance	N/A
Tear Resistance	Level 2
Puncture Resistance	Level 3
ISO Blade Cut Resistance	Level E

EN 407

• EN 407: 422141

Property	Resistance Level
Burning Resistance	Level 4
Contact Heat Resistance	Level 2 (250°C)
Convective Heat Resistance	Level 2
Radiant Heat Resistance	Level 1
Molten Metal Resistance (Small Splashes)	Level 4
Molten Metal Resistance (Large Splashes)	Level 1

WHAT IS AN ARC FLASH EVENT?

An arc flash event is an electrical explosion event that occurs when a connection moves through the air, to the ground or another voltage phase in an electrical system. The fallout from this explosion can reach temperatures in excess of 20,000°C.

Incredible Heat Resistance

HexArmor 4062 Safety Gloves go above and beyond in the realm of heat protection. A quick glance at the protection ratings table above show that. They have incredible burning flame protection, allow the user to handle material of up to 250°C in temperature and guard against both small and large splashes of molten metal.

Exceptional Level E Cut Resistance Rating

Level E cut resistance is the second highest rating awarded under EN 388. It indicates that the fabric used in the manufacturing process can withstand up to an incredible 30 newtons of downward pressure applied by a sharp implement.

Goatskin Leather Palm Foundation Fabric

Goatskin leather is a staple fabric in the glove manufacturing industry. It is supple, lightweight and inherently water-resistant. Despite this goatskin remains incredibly durable, offering some of the highest protection ratings available in the industry.

How Dexterous Are the HexArmor Gloves?

The HexArmor Gloves utilise a close-fitting, anatomic design and patented technology to provide impressive touch sensitivity and dexterity. Not only will these gloves feel like a second skin, but their extended safety cuffs won’t impede your dexterity at all, allowing for extensive protection across the wrists.

How Do the HexArmor Chrome SLT 4062 Gloves Protect Me From Heat?

The HexArmor Chrome SLT 4062 Gloves are constructed from retardant materials to keep the wearer safe from burning heat sources. Not only will the gloves insulate the weather against hot contact temperatures of 250°C, but will also ensure high-tier protection against molten splashes, making them great for refineries.

Additional Documentation

• Washing Instructions
• Declaration of Conformity Statement