Blackrock Level C Cut-Resistant Lithium PU Coated Gloves

When looking for a pair of safety gloves for performing precision handling tasks, the most important aspect to consider is that your gloves don’t restrict movement, especially if those tasks require cut protection too. Ideal for dry handling, the Blackrock Level C Cut-Resistant Lithium PU Coated Gloves provide ISO cut level C protection, whilst retaining flexibility and dexterity.

What’s Included?

• 1 x Pair of Gloves

Sizing Information

The Blackrock Lithium PU Coated Gloves are available in different sizes. To find the best size for your hands, simply measure the circumference of your palm and the length of your hand as shown in the diagram below. Once you have these measurements, please match your results to the sizing table and select your desired size from the drop-down at the top of the page.

Size	Palm Circumference	Hand Length
Size 8	203mm	182mm
Size 9	229mm	192mm
Size 10	254mm	204mm

Applications of the PU Coated Gloves

With a grippy PU coating, and glass fibre liner that provides cut resistance, the Blackrock Gloves protect and support hands during dry handling applications across various industries including, but not limited to, the following:

• Automotive
• Construction
• Engineering
• Assembly
• Glass Handling
• Tiling

Tested to EN Safety Standards For Reliable Protection

EN 388: Mechanical Resistance

• EN 388: 4X44C

The Blackrock Lithium PU Coated Gloves have been tested against mechanical risks under the European standards EN 388. This standard tests the gloves’ protection against hazards such as cuts, tears, puncture, and abrasion, and can be used to determine how hardwearing the gloves are.

Hazard	Resistance Level
Abrasion Resistance	Level 4
Cut Resistance	N/A
Tear Resistance	Level 4
Puncture Resistance	Level 4
ISO Cut Resistance	Level C

KEY FEATURES AND BENEFITS

• PU coating and blended fibres help you perform intricate tasks safely
• Glass fibre and stretch fabric liner offers cut protection and excellent comfort
• Provides a close and secure fit so you remain as dexterous as possible
• High mechanical strength prevents gloves from tearing in tough environments
• Provides excellent abrasion, tear and puncture resistance for handling rough materials
• Elasticated wrist for secure fit
• Certified to EN 420 and EN 388

HIGH MECHANICAL STRENGTH

As seen from the EN 388 ratings above, these gloves have outstanding strength offering high abrasion, tear, and puncture resistance. The high mechanical strength of these tough gloves help ensure the gloves don’t wear and tear even in tough environments.

Level C Cut Protection

With a glass fibre and stretch fabric liner, the Blackrock PU Coated Handling Gloves offer level C cut-resistance. This rating indicates that the gloves provide medium protection against cut hazards with a force of up to 10 newtons, and are classed as offering similar levels of protection as cut level 5 gloves – which cover the old EN 388:2003 standards.

Comfortable Protection

The PU Coated Cut Resistant Gloves are seamless in construction so you remain comfortable as well as protected. An elasticated wrist also adds to the glove’s comfort factor, allowing for a secure fit, without restricting movement.

Documentation

• Conformity Statement