Ansell RIG0011Y ActivArmr Class 00 Electrical Gloves

Made of insulating natural latex rubber, the Ansell RIG0011Y ActivArmr Class 00 Electrical Gloves are critical PPE for electrical work or applications with risk of touch voltage. Ensuring comfort and ease-of-wear, a ‘hand-at-rest’ design and non-splayed fingers reduce hand fatigue, and a smooth finish simplifies donning and doffing.

What’s Included?

• 1 x Pair of Gloves

Sizing of the Ansell Class 00 Electrical Safety Gloves

The Ansell RIG0011Y Gloves are available in a choice of sizes, each with. To find your correct size please measure the circumference of your palm and length of your hand, as shown in the diagram below, and match your results to the table.

Size	Palm Circumference	Hand Length
Size 7	178mm	171mm
Size 8	203mm	182mm
Size 9	229mm	192mm
Size 10	254mm	204mm
Size 11	279mm	215mm

Applications of the Ansell RIG0011Y Class 00 Electrical Gloves

The Ansell Class 00 Electrical Gloves are suitable for the following applications:

• Automotive
• Applications with risk of touch voltage
• Electrical contractors
• Electronics
• Hybrid engine manufacturing and repair
• Logistics and warehousing
• Machinery and equipment
• Maintenance repairs and operations (MRO) in industrial environments
• Mass transit repair and maintenance
• Mining
• Power maintenance, repair and transmission
• Public utilities
• Telecom repair near electrical wires
• Construction work

Tested To EN Safety Standards

EN 388: Mechanical Resistance

• EN 388: 2111A

The Ansell ActivArmr Rubber Insulating Gloves have been tested against mechanical risks under the European standards EN 388. This standard tests the gloves’ protection against hazards such as cuts, tears, puncture, and abrasion.

Hazard	Resistance Level
Abrasion Resistance	Level 2
Cut Resistance	Level 1
Tear Resistance	Level 1
Puncture Resistance	Level 1
ISO Cut Resistance	Level A

Other – 

• EN 60903:2003
• EN ISO 21420:2020
• CE PPE category ELECTRICAL
• Category III
• Arc Rating APC 1
• ASTM D120

Key Features and Benefits

• Made from 100% natural rubber latex using a proprietary environmentally friendly dipping process
• Arc flash certified, able to withstand a touch voltage AC maximum of 500 V
• Gloves are certified for resistance to acid (Category A), Ozone (Category Z), and very low temperatures (Category C)
• Provide hands with ultimate flexibility and dexterity while working
• Risk of hand fatigue is reduced by the ergonomic hand-at-rest shape and non-splayed fingers
• Flared cuff design allows room for clothing and ventilation
• Smooth finish of the gloves enables easier donning and doffing
• Available in a range of sizes for a comfortable fit

Arc Flash Certified

The Ansell RIG0011Y Gloves are arc flash certified (APC 1 in combination with 96-002 leather gloves), withstanding a touch voltage AC maximum of 500 V (DC maximum 750) and guard against acid, ozone and very low temperatures*

Enhanced Performance

If hands become fatigued, or if they move more slowly to avoid any posed threats that could cause harm or skin irritations, then a job can both take longer and become increasingly more dangerous. With a hand-at-rest shape and non-splayed fingers, the RIG0011Y Gloves not only protect hands but also help reduce hand fatigue, allowing you to perform your best for longer.

Practical Construction

The RIG0011Y gloves have been constructed from 100% natural rubber latex using a proprietary environmentally friendly dipping process. A smooth finish on the gloves simplifies donning and doffing for increased practicality.

Documentation

• Conformity Statement
• Data Sheet
• Instructions Sheet

Please note that these gloves are made to order, and therefore have a three-month lead time on average.