Ansell HyFlex 70-114 35.6cm Cut-Resistant Kevlar Sleeve

The Ansell HyFlex 70-114 35.6cm Cut-Resistant Kevlar Sleeve is a knitted protective sleeve manufactured from tough and reliable Kevlar fibres for superior resistance to cut and tear. Protecting against contact heat up to 100°C, and featuring a thumbslot for wrist protection, this sleeve is ideal for a wide range of medium-risk applications in the automotive, construction, glass and metal fabrication industries.

Features and Benefits of the HyFlex 35.6cm Kevlar Sleeve

• Knitted sleeve with a length of 35.6cm
• Made from Kevlar for strong and reliable protection
• With thumbslot to provide protection to the wrist
• Protects against contact heat up to 100°C
• Excellent resistance to cut and tear
• Lightweight and comfortable
• Washable at 40°C for better hygiene

Manufactured from Kevlar for Lightweight Protection

The HyFlex 70-114 Sleeve is manufactured from 100% DuPont Kevlar to offer a high cut-resistance-to-weight ratio. As a result, this sleeve provides excellent protection against cut, while remaining lightweight for maximum user comfort and dexterity.

Thumbslot for Better Safety

Featuring a thumbslot for additional protection, the HyFlex 70-114 shields both the arm and the wrist against harm. This makes the sleeve suitable for more manual handling tasks, and when worn with a protective glove provides full protection from the elbow down.

Applications for the Hyflex 70-114 Cut-Resistant Sleeve

Protecting against mechanical risk and contact heat up to 100°C, the HyFlex Kevlar Sleeve is suitable for a variety of applications, primarily in the automotive, construction, glass and metal fabrication industries. Ideal uses include (but are not limited to):

• Assembly and finishing
• Assembly of white goods
• Stamping operations
• Body assembly
• Glass repair
• Metalwork

Testing of the HyFlex 70-114 Kevlar Sleeve

The Ansell 70-114 Sleeve meets the following specifications:

• European Directive 89/686/EEC
• EN 420:2003 + A1:2009
• EN 388:2016: 134XC
• EN 407:2004: X1XXXX

The HyFlex 70-114 Sleeve has been tested to EN 388:2016 to determine its resistance to mechanical risks. Please see the table below for the results of these tests:

Hazard	Resistance Rating
Abrasion	Level 1
Cut	Level 3
Tear	Level 4
Puncture	X
ISO Cut	C

When tested to EN 407:2004 for heat resistance, the HyFlex Kevlar Sleeve achieved the following results:

Hazard	Resistance Rating
Flammability	X
Contact heat	Level 1
Convective heat	X
Radiant heat	X
Small splashes of molten metal	X
Large splashes of molten metal	X

Sizing of the Ansell 70-114 Sleeve

This sleeve is available in one size, which should fit most users. The sleeve has a length of 35.6cm.

Documentation for the Ansell 70-114 Cut-Resistant Sleeve

Conformity Statement	Instructions for Use

Please note that the price listed is for one HyFlex 70-114 Sleeve only.