Ansell E023Y Electrician Class 3 Long Yellow Insulating Rubber Gloves

Designed primarily to protect the hands of electricians at work, the Ansell E023Y Electrician Class 3 Long Yellow Insulating Rubber Gloves are ideal for providing hand protection for a wide range of applications. They provide flexibility and dexterity with 100% natural rubber latex, as well as preventing hand fatigue with an ergonomic and non-splayed design.

The product code for the gauntlet gloves is: E023Y.

Key Features and Benefits of the E023Y Gloves

• Longer glove design made from 100% natural rubber latex using a proprietary environmentally friendly dipping process
• Gloves provide hands with ultimate flexibility and dexterity while working
• Risk of hand fatigue is reduced by the ergonomic hand-at-rest shape and non-splayed fingers
• Flared cuff design allows room for clothing sleeves
• Smooth finish of the gloves enables easier donning and doffing
• Category R certification for passing A+Z+H properties required by EN 60903
• Certified for resistance to very low temperatures (Category C)
• Ideal for applications with a risk of touch voltage AC ≥50V 
• Class 3 gloves suitable for a maximum working AC voltage of 26,500V
• Available in a range of sizes for a comfortable fit
• Suitable for a range of applications, from automotive and electronics to repairs and maintenance

Enhanced Performance

If hands become fatigued, or if they move more slowly to avoid any posed threats that could cause harm or skin irritations, then a job can both take longer and become increasingly more dangerous. The E023Y gloves will protect your hands while also reducing the risk of hand fatigue with the hand-at-rest shape and non-splayed fingers, allowing them to perform their best for longer.

Practical Construction

The E023Y gloves have been constructed from 100% natural rubber latex using a proprietary environmentally friendly dipping process. They provide excellent flexibility and dexterity, ensuring that hand movement is not severely restricted while working.

Applications of the Ansell Electrician E023Y Gloves

The Ansell Electrician Class 3 Insulating Rubber Gloves are suitable for the following applications:

• Automotive
• Applications with risk of touch voltage AC ≥50V
• Electrical contractors
• Electronics
• Hybrid engine manufacturing and repair
• Logistics and warehousing
• Machinery and equipment
• Maintenance repairs and operations (MRO) in industrial environments
• Mass transit repair and maintenance
• Mining
• Power maintenance, repair and transmission
• Public utilities
• Telecom repair near electrical wires

Testing of the Ansell E023Y Gloves

Following testing of the Ansell E023Y gloves, the following results apply:

• Category R certification for passing A+Z+H properties required by EN 60903
• Certified for resistance to very low temperatures (Category C)
• Class 3 gloves suitable for a maximum working AC voltage of 26,500V

Sizing of the Ansell Electrician Gloves

The Ansell Electrician E023Y Gloves are available in a choice of sizes, making them suitable for most users. Please consult the table below for details, then select the required size from the drop-down menu at the top of the page. The Gloves have a thickness of 0.5mm and a length of 410mm.

Glove Size	Hand Circumference (mm)	Hand Length (mm)
Size 9	229mm	192mm
Size 10	254mm	204mm
Size 11	279mm	215mm
Size 12	Over 279mm	Over 215mm

Documentation for the Ansell e023y Gloves

Conformity Statement	Instructions for Use

Please note that these gloves are made to order, and therefore have a three-month lead time on average.